But they cannot guarantee that all the switches they made have exactly the same force and travel distance, so they put a safe range on every spec of their spec,” Paul Tan, Keychron COO, told Tom’s Hardware.īut given that spec sheets typically provide hard figures (imagine if a CPU said it had 2 ± CPU cores!), this can be confusing to see, even for a keyboard enthusiast. “Namely, every switch manufacturer will try to make their switch to the exact spec as much as possible. And when we say very exact, we mean it these are minute differences we’re talking about. Not to mention, it doesn’t hurt your fingers when you try to pry them off.Having tolerance in mechanical switch specs gives switch makers wiggle room in the very exact performance of their tiny keyboard component.
We highly recommend getting a wire keycap puller as it’s the easiest to use and won’t damage your keycaps like a plastic one will. Removing your keycaps is a super simple process that anybody can do! Just follow the simple steps laid out in this guide and you’ll remove them in no time.
#Mechanical keyboard keyclick mod#
Mod your keyboard: There are dozens of mods out there to improve your keyboard and the vast majority of them require you to remove your keycaps.Check out a new set of PBT keycaps and see what will work the best with your setup! Replace your keycaps: There are few ways better to give your keyboard a facelift than by replacing your keycaps.With the keycaps off, now is the perfect time to replace the switches or clean them out. Fix your switches: After heavy usage or if gunk gets inside them, your switches can get sticky or backed up.Clean your keyboard: If you remove your keycaps, you can give your keyboard the deep clean it deserves! Now is the time to clean off all of the gunk and dust bunnies that have accumulated over the past few months.Here’s what else you can do while your keycaps are removed! If you’re looking this article up, chances are it’s for one of these reasons. For a keycap puller that you can reuse, look at this simple video here. You can see a simple example in this YouTube video. It’s not perfect and may need to be reformed many times before all your keys are pulled, but it’s super simple. Then all you need to do is slide it under a keycap and then lift. Simply take a paper clip, unfold it into a straight line, and then make an L shape. This is not a great replacement for a keycap puller, but can be done in a pinch if you need to take off one of your keycaps.
If you don’t have a keycap puller on-hand, another option is to make one!Īll you’ll need it a paper clip and your fingers.
#Mechanical keyboard keyclick how to#
For these keys it’s best to remove from one side first and then the other.Īnd that’s it! Pretty simple, right? How to Make a DIY Keycap Puller The larger keys, such as the spacebar and shift key, will be a bit tougher to remove because the keycap is attached to the stabilizer stems. Take a little bit of care during this process. If you try to yank the keycaps off it can damage the stem or even yank the whole switch out. You’ll want to gently pull and wiggle the keycap puller with increasing force until the keycap comes off. Step 3: Gently Pull Until the Keycap is Removed
Once you have one keycap off, it should be easier to get underneath the rest of them from the exposed area. If you’re using your fingers, getting the first keycap off is the hardest part, you’ll probably need to use your finger nails. You’re basically trying to get enough leverage so you can pull up on the keycap to overcome the friction between the keycap and the stem of the switch underneath. The next step is to insert your keycap puller.Ī wire keycap puller involves sliding the metal wires under the bottom of the keys so you can pull them off.Ī plastic keycap puller involves sliding it over the keycaps until the plastic snaps underneath the keycap. You can choose between the following options as your keycap puller: A plastic keycap puller can scratch the sides when you try to snap it on.Īnother option is to make your own, DIY style. We recommend getting a wire keycap puller because they are less likely to scratch the sides of your keycaps. You could use your fingers if you want, but it will be a slow and painful process. To efficiently remove your keycaps, you’ll need a keycap puller on-hand. Let’s get started! Step 1: Get a Keycap Puller (Or A DIY One) Plastic vs Wire Keycap Puller Luckily, it’s a super process and we’ll walk you through the steps.Īll you’ll need for this a keycap puller and your keyboard. Removing your keycaps is necessary to give your mechanical keyboard a good clean.
0 kommentar(er)
